Equipment
Main Menu - Equipment
"UserSide" supports accounting of different types of network equipment. Some types have their own sections and the system has individual functionality for them.
![](/images/thumb/4/42/2023-12-06_16-54.png/800px-2023-12-06_16-54.png)
Specifically:
- Switches
- Radio equipment
- Media Converters
- CWDM
- so-called System devices (without reference to Inventory)
- so-called Random devices (with reference to Inventory)
In the main sections it is possible to generate the necessary reports.
![](/images/5/5c/2023-12-06_16-54_1.png)
When adding a device, the following is specified:
- Location of the inventory item
- INVENTORY
- Location object
- IP
- Number of ports
- Notes
![](/images/d/d4/2023-12-06_16-55.png)
It is understood that the equipment can be installed in a communication node or (from version 3.13) at the user.
![](/images/thumb/a/a8/2023-12-06_16-56.png/800px-2023-12-06_16-56.png)
For convenient identification of the equipment, it is possible to add marks.
![](/images/e/e3/2023-12-06_16-57.png)
Group actions, allow you to perform necessary operations in bulk from an existing list in the system.
When adding a new section in the Product catalogue with equipment, you can configure its display in the "Equipment" menu.
![](/images/2/20/2023-12-06_16-57_1.png)
Starting from version 3.17 in the equipment commutation menu, it is now possible to bind a task to an equipment port.
![](/images/4/4a/2023-12-06_16-58.png)
On the port itself, the task number will be present.
![](/images/9/90/2023-12-06_16-59.png)
The task card will show the ports of the equipment to which this task is bound (allows you to reserve ports for the task).
![](/images/7/73/2023-12-06_17-00.png)
Starting from version 3.17, in the device access settings, you can specify "disable completely" the use of SNMP for this device.
![](/images/2/23/2023-12-06_17-00_1.png)
In the equipment card, under "Parameters of access to the equipment" you can configure the telnet port for connection (from version 3.17 onwards).
![](/images/9/91/2023-12-06_17-01.png)
Starting from version 3.18:
Added enabling and disabling polling by usm_peleng module to equipment group actions
![](/images/e/ef/2023-12-06_17-02.png)
In the left menu in the "Equipment" section added the ability to switch to the equipment card by its inventory number (switched on/off).
![](/images/3/38/2023-12-06_17-03.png)
![](/images/3/36/2023-12-06_17-03_1.png)
In the dialogue box of switching to equipment, the possibility of quick search by equipment has been added (previously only by communication facility or by user who owns the equipment).
![](/images/9/90/2023-12-06_17-05.png)
Starting from version 3.19:
Implemented use of a single SNMP-community instead of separate read-only and read-write communities
![](/images/9/93/2024-05-01_21-48.png)
Commutation from a device port can be switched to another port not only of the same device, but also of another device on this communication facility
![](/images/8/8a/2024-05-01_21-52.png)
When specifying an equipment port as UPLINK (or DOWNLINK) - on the opposite equipment the reverse DOWNLINK (or UPLINK) mark is set on the corresponding port (if there is switching)
![](/images/f/ff/2024-05-01_21-55.png)
It is possible to search in the equipment list by part of MAC address
![](/images/8/8f/2024-05-01_21-57.png)
In the equipment cards, which are installed in the rack/cabinet, added display of the unit number in the rack
![](/images/5/5b/2024-05-01_21-59.png)