Просмотр кода страницы Auto assignment of customers to ports

[[Auto_assignment_of_customers_to_ports|en]] | [[Автопривязка_абонентов_к_портам|ru]]

For [[Switches|switches]] ports, you can enable so-called "Autoswitching of ports".

[[File:2023-12-11_19-49.png|frame|1000px|center]]

In the process, the ERP "UserSide" obtains information about the MAC addresses on the equipment ports. If these MAC addresses are known and belong to customers - then it performs [[Commutation of objects|commutation]] of the found customers with the ports. 

The following logic is followed:
* when a managed switch is added, autoswitching is enabled for all ports
* autoswitching is enabled only if there is no MAC address or 1 MAC address on a port.
* if there is more than 1 MAC address on a port, autoswitching is disabled.
* if there is 1 MAC-address on the port and it belongs to a customer, the customer will switch to the port and autoswitching on this port will be switched off.
* if there is a MAC address on port 1 and its owner is unknown, autoswitching continues to work, waiting for the owner of the MAC address to be found out.

Autoswitching is executed when the scheduler job "2. [[Scheduler - Autosnap of the customers to the ports]]"